Procedure

The KÖHN analysis according to DIN ISO 11277 is so far the only rational measuring method which provides identical results to the sedimentation analysis with the same dependence on the grain shape. In this method, the sinking velocity of soil particles is investigated at 25 °C on a previously homogenized soil sample separated from carbonates and organic matter. The results are used, for example, to generate grain sum curves, which form the basis for many soil physical investigations.

The fine soil is composed of the fractions coarse silt (gU), medium silt (mU), fine silt (fU) and clay (T). This is illustrated by the grain size triangle. Due to the different grain sizes (<2.0 µm to

The separation of the fractions is done by pipetting analysis. During the sinking process, defined volumes are taken from the suspension at a defined height at defined times, and their mass of solids content is determined afterwards. Due to the high accuracy requirements, the manual test procedure involves many sources of error, such as deviations in the immersion depth of the piepette or the sampling time, and is very tedious due to the slow sinking speed of fine soil particles.

By automating this measurement procedure, the amount of work is significantly reduced and accuracy is increased. Subjective measurement errors are eliminated. Temperature fluctuations, vibrations and turbulence, which have a great influence on measurement accuracy, are also minimized. Since the work is limited to sample preparation and evaluation, the Sedimat 4-12 can be used to perform a complete KÖHN analysis on 12 samples for all 4 fractions per working day. The exact adherence to the test parameters for homogenization, temperature control and pipetting leads to a statistically reliable result. The scattering factor in case of repetition on the same samples is

Paul R. (2004): Automated grain size analysis according to KÖHN. Series of publications of the TLL 48-55.

Training on sample preparation

We offer training in field sampling for use in the SEDIMAT 4-12. The training includes:

•           the preparation, the documentation and the sampling instruments

•           Soil sampling in the field

•           Sample transport

•           preparation (sieving, drying, storage)

Training Sedimat 4-12

•           Sample pre-treatment for analysis: weighing, humus destruction, removal of soluble salts, homogenization, wet sieving

•           Samples analysis with laboratory automat Sedimat 4-12

•           Analytical values

•           Compilation of results

•           Soil type determination (digital)

The trainings take place in the field or in our premises. We are happy to offer training at your site.

Width: 1.69 m

without monitor holder - positioning according to customer requirements  

Depth: 0.86 m

Height: 1.93 m

Total weight (ready for operation): approx. 400 kg

Electrical connection: CEE16, 16 A 3 N/PE AC 380 V / 50 Hz

Program run times with 12 samples and

30 minutes sample heating time to 25°C               DIN ISO 11277                   ASTM

                                                Fraction 1               approx. 1.5 h                     approx. 1.5 h

                                          Fraction 2               approx. 2 h, 10 min            approx. 8 h

                                                Fraction 3               approx. 2 h   

                                                Fraction 4               approx. 8 h   

                                    Fraction 1 to 4 / 2               approx. 11 h 45 min           approx. 9 h

Sedimentation times realised by the program       DIN ISO 11277                   ASTM

                                                Fraction 1              49 s (Depth 20 cm)             80 s (Depth 20 cm)

                                                Fraction 2              04:07 min (Depth 10 cm)    06:52:50 h (Depth 10 cm)

                                                Fraction 3              45:52 min (Depth 10 cm)   

                                                Fraction 4              06:52:50 h (Depth 10 cm)  

Fraction 1 (F1): coarse silt, Fraction 2 (F2): medium silt, Fraction 3 (F3): Fine silt, Fraction 4 (F4): clay.

https://ugt-online.de/en/solutions/sedimat-4-12/